Po box 6691 Muhima KN87 ST4

Dolomite vinyl matt

DOLOMITE Matt Emulsion is a high-quality acrylic co-polymer latex paint pigmented with titanium dioxide and other light fast alkali resistant pigments. It has a very good wash ability scrub resistance and good color retention property with a smooth and pleasing effect. It has excellent brush ability with good resistance to algae and fungal attacks

Substrates: Concrete, cement plaster, masonry, gypsum, block work etc.

Area of Use: Interiors & Exterior application.

Properties

 

Finish                                           : Smooth & Matt

Color                                            : White + all shades as per DOLOMITE shade card and custom made.

Specific gravity                            : 1.45 ± .02

Solids (% by volume)                  : 37 ± 1%

Diluent                                         : Sweet Water

Flash point                                   : Not Applicable

Spread Rate:

While the spread rate is directly dependent on the surface profile and also the type of undulations it has, over spray and also the equipment the painter DOLOMITE Diamond Emulsion it would cover app 8 m2 / liter at 40 microns per coat.

Drying Time (30° C)                     : Set to touch: 1 – 2 hours.

: Ready for Recoat: app 2 – 3 hours.

Recommended DFT                      : 2 coats.

App 30 – 40 mic per coat.

A good surface preparation and following the method statement / recommended system procedure of DOLOMITE is an ideal recommendation for the application of DOLOMITE Matt Emulsion.

 

For Plaster, Masonry & Concrete:

 

Achieve a good and clean surface by removing all contaminants and loose particles by cleaning & drying. A laitance free surface should be achieved by good sweep blast or a wire brush. Water washing under pressure is recommended. Apply the DOLOMITE PVA Primer, or DOLOMITE Acrylic Alkali resistant primer or DOLOMITE All weather Tex primer and allow drying as per the data sheet and subject to one more coat for even coverage. For Exterior: Apply DOLOMITE filler compound (fine or coarse) evenly and allow drying and following it up with DOLOMITE Matt Emulsion for one or two coats. For Interior: After applying the DOLOMITE AR primer, apply a uniform layer of DOLOMITE Stucco putty and then follow it up with DOLOMITE Matt Emulsion for two coats.

For Old and Painted surfaces:

In case of surfaces which are painted / or aged and if there is visible dusting, chalking or even friable, ensure that all the loose material is removed by scrapping or metal brush. Apply a good coat DOLOMITE Fungicidal wash compound and allow drying.

Follow this by a regular coat or two of DOLOMITE Alkali Resistant primer and continue as in the above case with the full system.

Adequate ventilation is an ideal situation as it helps in drying and the good application itself. Avoid high humid conditions i.e., >95% when condensation is likely to interfere and also when the surface temperature is at least 3°c above dew point.

 

  1. Dilution: One can add 5 to 10% of sweet water for ease of application depending on the suitability of
  2. Brush: It is in ideal recommendation especially to avoid runs and sags due to
  3. Roller: Apply an even coat spreading uniformly taking care to avoid
  4. Airless spray: Use tip size around 0018” to 0020” and pressure around
  5. – 175 Kg/cm².
DOLOMITE Diamond Emulsion

 

Recommended system to be applied as per surface preparation.

 

·        Or as per DOLOMITE technical advice

DOLOMITE Alkali Resistant Primer or PVA Primer   DOLOMITE Stucco Putty

DOLOMITE Matt Emulsion

1  coat

2  coats

2 coats

Under dry and cool condition, storage stability can be sound up to 18 months in original sealed containers.

 

HANDLING

Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.

Flash Point: Not applicable

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream.

Ensure that there is adequate ventilation in the area where the product is being                                                                                                            applied. Do not breathe vapor or spray.

MSDS is available on request for the safe handling of this product.

 

FIRST AID

Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.

Skin:           Wash skin thoroughly with soap and water or approved industrial cleaner. DO NOT USE solvent or thinners.

Inhalation: Remove to fresh air, loosen collar and keep patient rested.

Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention

Description

DOLOMITE Matt Emulsion is a high-quality acrylic co-polymer latex paint pigmented with titanium dioxide and other light fast alkali resistant pigments. It has a very good wash ability scrub resistance and good color retention property with a smooth and pleasing effect. It has excellent brush ability with good resistance to algae and fungal attacks